The abbreviation means Across Flat, it roughly means “measured crosswise” the sockets fit UNF and UNC threads.When measuring the head, you should use a 9/16″ sockets.The size of the head is important.We sell both standard and deep sockets.
What does a f mean in spanners?
What thread is af?
What are Joker spanners?
With a holding function, the nuts and bolts can be held in the jaws and easily positioned where needed, reducing the risk of losing nuts and bolts.It has features such as its limit stop that prevent it from slipping down.
What is a BSF spanner?
The diameter in inches of the threaded portion on the bolt is the size marked on a Whitworth or B.S.F spanner.Whitworth and British Standard Fine were phased out by the 1960s, but some manufacturers continued to use them.
What is a F in nut?
A/F Across The Flats is a widely-used system of measuring nut sizes.The distance between the jaws and flats of the wrench needed to turn the nuts and bolt-heads is measured.Measure the thread size of the bolt using this method.It’s usually quoted as 7/8″ A/F.
When did British stop using Whitworth?
An agreement between the UK, US, and Canada to standardise on the American UNC and UNF fasteners made Whitworth and BSF obsolete in 1948.
What size is a coax cable nut?
Every home enthusiast should have a 7/16′′ wrench.It’s the right size for cable connections.
What are the Joker’s followers called?
The Streetgang, also known as the Joy Boys, is a gang of criminals who work for the Joker in the city.
What is a joker ratchet?
The nuts and bolts can be held in the jaws and easily positioned where needed, reducing the risk of losing nuts and bolts.It has features such as its limit stop that prevent it from slipping down.
What does AF mean in sockets?
The term width across flats is used for the following forms.There is a profile square section.Regular is 6socket, 8-square.
What is a Whitworth bolt?
The British Standard Whitworth is an imperial-unit-based screw thread standard.The world’s first national screw thread standard is the basis for many other standards.
What is a grade 10 nut?
Class 10.This is a metric nut that is used in conjunction with Class 10.9 bolts.In automotive, structural, and high temp industries, this strength of nut is used.
What is a class 12 nut?
Class 12 nuts are intended for use with screws and bolts.Class 12 nuts will be made of a steel which complies with the following chemical composition.
What does 11 mean on a bolt?
May 18, 2020 at 8:33 am.The mark is a manufacturer’s mark.You would want to replace it with a grade 8 bolt.
What did make UK used to be called?
History.The Engineering Employers’ Federation was formed in 1896 and merged with the National Employers’ Federation in 1918.
When did England stop using miles?
Goods sold in Europe have to be weighed or measured in metric, but the UK was temporarily allowed to use the imperial system.The opt-out was due to end in 2009, with only a small amount of beer, milk and cider.
How do I connect an antenna to a broken coaxial TV?
The output of the VCR can be connected to the TV with the help of the broken antenna.Set the TV input to the input to which you made the connection by selecting the channel with the controls.